8K HDMI高清矩阵
8KHDMI高清矩阵 HS-X0808A-8K
一、产品介绍：
HS-X0808A-8K系列8K分辨率HDMI高清矩阵，8路HDMI输入，8路HDMI输出的高清视频、多通道数字音频传输。最高分辨率4K2K@120Hz 4:4:4 12bit和8K4K@60Hz 4:2:0 12bit。每个输出通道都可单独分辨率缩放、HDR转换。兼容蓝光播放器、数字机顶盒、家庭影院、电脑、游戏机等设备信号源，可以通过前面板按键、IR遥控器、Web GUI、RS232指令进行控制。
二、产品特性：
符合 HDCP 2.3、HDMI 2.1规范;
视频分辨率高达 4K2K@120Hz 4:4:4 12bit 和 8K4K@60Hz 4:2:0 12bit符合 HDMI 2.1 规范;
支持 48Gbps 视频带宽;
4/8/16 路 HDMI输入信号可单独传输至4/8/16路 HDMI输出;
支持每个输出端口的8K->4K或8K/4K->1080p向下缩放；
支持 HDR, HDR10, HDR10+,Dolby Vision 透传;
支持 VRR, ALLM, QMS, QFT, SBTM;
支持光纤音频和平衡模拟音频输出;
智能 EDID 管理;
通过前面板按键、IR 遥控器、Web GUl和 RS-232 指令进行控制;
三、功能说明：
序号 | 名称 | 功能描述 |
1 | LCD屏幕 | 显示矩阵的切换状态、输入输出端口、EDID、波特率、IP 地址等信息。 |
2 | 电源指示灯 | 设备工作时，指示灯亮绿色，待机状态下指示灯亮红色。 |
3 | IR | IR 信号接收窗口，接收来自遥控器的红外信号。 |
4 | INPUT / OUTPUT按键 | 先按 OUTPUT(1~8)键选择输出通道，再按INPUT(1~8)键选择相应的输入信号源。 |
5 | MENU / ENTER / UP / DUWN | 以 RESET 为例: 1、在 LCD 屏幕显示初始界面时，按面板右侧的“MENU”按键，此时屏幕显示 OUTPUT/INPUT/EXTAUDIO/SETUP 选项可供选择。 2、按“UP/DOWN”按键选择"SETUP" 3、按“ENTER”按键进入下一级菜单，此时屏幕显示 LCD ONTIME/BAUDRATE/IP INFO/REBOOT/RESET 选项可供选择。 4、按“UP/DOWN”按键选择"RESET"。 5、按“ENTER”按键确认，屏幕提示:SUCCESS! 即表示复位操作完毕提示:按“MENU”可返回上一级菜单。 |
6 | POWER按键 | 长按1秒进入待机模式，再次短按即唤醒。 |
7 | LOCK按键 | 短按锁定前面板按键(电源键除外)，再次短按即解除锁定 |
序号 | 名称 | 功能描述 |
1 | AUDIO OUT(1~8) | OPTICAL: 光纤音频输出端口，连接音频输出设备，如功放。 L/R AUDIO: 模拟音频输出端口，支持平衡音频输出和非平衡音频输出(最大值 2Vrms)。 平衡音频连接方式:L+,L士，R+,R-；非平衡音频连接方式:L+，一，R+； |
2 | TCP/IP | TCP/IP 控制端口，使用 UTP 网线连接 PC或路由器，通过网络控制矩阵 |
3 | RS232端口 | RS-232 串口命令控制端口，通过 D-Sub 线连接电脑或者控制系统，传输RS-232 指令。 |
4 | IR EXT | 红外信号接收接口，连接 12V 红外接收线。若设备前面板上的 IR 接收窗被挡或者设备安装在一个红外信号无法接收的封闭区域，则可以通过在IR EXT接口插入IR接收线来接收IR遥控器的信号 |
5 | HDMI INPUT端口（1-8） | HDMI信号输入端口，通过 HDMI线连接 HDMI信号源设备，如 8K电脑DVD 播放器或电视机顶盒。 |
6 | HDMI OUTPUT端口（1-8） | HDMI信号输出端口，通过 HDMI线连接 HDMI显示设备，如电视机或监视器。 |
7 | DC 24V | 连接24V/3.75A电源适配器 |
8 | GND | 将外壳接地 |
四、技术指标：
HDMI兼容 | HDMI 2.1 |
HDCP兼容 | HDCP 2.3 |
视频带宽 | 48Gbps |
视频分辨率 | 高达4K2K@120Hz 4:4:4 12bit、8K4K@60Hz 4:2:0 12 bit |
颜色空间 | RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2, YcbCr 4:2:0 |
颜色深度 | 8/10/12bit |
音频格式 | HDMI输入/输出:LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTSDTS-EX,DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD音频剥离: 光纤音频输出:LPCM 2.0CH/DoIby/DTS 5.1CH平衡模拟音频输出:LPCM 2CH |
HDR格式 | HDR, HDR10, HDR10+,Dolby Vision,HLG |
静电保护 | IEC61000-4-2:+8kV(空气放电)，±4kV(接触放电) |
输入端口 | 8 x HDMIINPUT [Type A,19-pin 母囗] |
输出端口 | 8 x HDMI OUTPUT IType A, 19-pin 母ㄩ]；8 xOPTICAL AUDIO OUT [S/PDIF]； 8 x AUDIO OUT [5pin-3.81mm 凤凰端子] |
控制端口 | 1 x TCP/IP [RJ45]；1 xRS-232 [D-Sub 9]；1 xIR EXT [3.5mm 立体声迷你接口] |
外壳 | 金属外壳 |
颜色 | 黑色 |
尺寸 | 440mm[长]x203mm[宽]x 44.5mm[高] |
重量 | 2.95kg |
电源 | 输入:AC 100-240V 50/60Hz，输出:DC24V/3.75A(美规/欧规，CE/FCC/UL认证)70W(最大值) |
功耗 | 70W |
工作温度 | 32-104°F/0-40°C |
储存温度 | -4-140°F/-20-60°C |
工作湿度 | 20%~80% 相对湿度，无凝结 |
储存湿度 | 10%~90% 相对湿度，无凝结 |
视频分辨率 | 8K/4K60/4K30/1080p |
五、连接示意图：
六、订货规格：
序号 | 产品名称 | 产品型号 | 功能描述 |
1 | 8K HDMI高清矩阵 | HS-X0404A-8K | 4路HDMI输入，4路HDMI输出；支持模拟音频、光纤数字音频输出； |
2 | 8K HDMI高清矩阵 | HS-X0808A-8K | 8路HDMI输入，8路HDMI输出；支持模拟音频、光纤数字音频输出； |
3 | 8K HDMI高清矩阵 | HS-X1616A-8K | 16路HDMI输入，16路HDMI输出；支持模拟音频、光纤数字音频输出； |
Introduction
The 48Gbps 8K 8x8 HDMI Matrix supports the transmission of high resolution video (resolution up to 4K2K@120Hz 4:4:4 12bit and 8K4K@60Hz 4:2:0 12bit) and multi- channel digital audio (such as LPCM 7.1CH, Dolby Atmos, Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio) from 8 HDMI sources to 8 HDMI displays. Resolution downscaling and HDR conversion for each HDMI output are also supported.
It works with Blue-Ray players, Set-Top boxes, Home Theater PCs, and game consoles which connect to an HDMI display, and can be controlled via front panel buttons, IR remote, RS-232, and Web GUI.
Features
☆ HDMI 2.1 and HDCP 2.3 compliant
☆ 8 × HDMI inputs can be independently routed to 8 × HDMI outputs
☆ Video resolution is up to 8K60Hz 4:2:0, 8K30Hz 4:4:4 and 4K120Hz 4:4:4
☆ Support 48Gbps video bandwidth
☆ HDR, HDR10, HDR10+, Dolby Vision pass-through
☆ Support 8K->4K or 8K/4K->1080p downscaling for each output port
☆ VRR, ALLM, QMS, QFT, SBTM are supported
☆ Support optical audio and balanced analog audio output
☆ Advanced EDID management
☆ Control via front panel buttons, IR remote, RS-232, and Web GUI
Package Contents
① 1 × 48Gbps 8K 8×8 HDMI Matrix
② 1 × 24V/3.75A Locking Power Adapter
③ 1 × IR Remote
④ 1 × IR Wideband Receiver Cable (12V, 1.5m)
⑤ 1 × AC Power Cord (1.5m)
⑥ 1 × RS-232 Serial Cable (1.5m, male to female head)
⑦ 8 × 5pin-3.81mm Phoenix Connector
⑧ 8 × Machine Screw (KM3*6)
⑨ 2 × Mounting Ear
⑩ 1 × User Manual
Specifications
HDMI Compliance | HDMI 2.1 |
HDCP Compliance | HDCP 2.3 |
Video Bandwidth | 48Gbps |
Video Resolution | Up to 8K60Hz 4:2:0, 8K30Hz 4:4:4 and 4K120Hz 4:4:4 |
Color Space | RGB_4:4:4, YCbCr_4:4:4, YCbCr_4:2:2, YCbCr_4:2:0 |
Color Depth | 8/10/12-bit |
HDR Formats | HDR, HDR10, HDR10+, Dolby Vision, HLG |
Audio Formats | HDMI IN/OUT: LPCM, Dolby Digital/Plus/EX, Dolby True HD, Dolby Atmos, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, DSD AUDIO BREAKOUT: Optical Outputs: LPCM 2.0CH/Dolby/DTS 5.1CH Balanced Analog Audio Outputs: LPCM 2CH |
ESD Protection | Human body model — ±8kV (Air-gap discharge) & ±4kV (Contact discharge) |
Connection | |
Input ports | 8 × HDMI INPUT [Type A, 19-pin female] |
Output ports | 8 × HDMI OUTPUT [Type A, 19-pin female] 8 × OPTICAL AUDIO OUT [S/PDIF] 8 × AUDIO OUT [3.5mm Stereo Mini-jack] |
Control ports | 1 × TCP/IP [RJ45] 1 × RS-232 [D-Sub 9] 1 × IR EXT [3.5mm, Stereo Mini-jack] |
Mechanical | |
Housing | Metal Enclosure |
Color | Black |
Dimensions | 440mm [W] × 203mm [D] × 44.5mm [H] |
Weight | 2.94kg |
Power Supply | Input: AC 100-240V 50/60Hz, Output: DC 24V/3.75A (US/EU standard, CE/FCC/UL certified) |
Power Consumption | 70W (Max) |
Operating Temperature | 32 - 104°F / 0 - 40°C |
Storage Temperature | -4 - 140°F / -20 - 60°C |
Relative Humidity | 20 - 90% RH (no-condensing) |
Operation Controls and Functions
Front Panel
NO. | Name | Function Description |
1 | LCD screen | Display matrix switching status, input / output port, EDID, Baud rate, IP Address, etc. |
2 | PWR Indicator | The LED is on green when the device is working. The LED is on red when the device is on standby. |
3 | IR | IR signal receiver. Receiving the signal from the IR remote. |
4 | INPUT / OUTPUT buttons | You need to press an output button (1~8) firstly and then press an input button (1~8) to select the corresponding input source for the output port. |
5 | MENU / ENTER / UP / DOWN | Take RESET, for example. ① On the initial LCD display screen, press “MENU” button. There are OUTPUT/INPUT/EXTAUDIO/SETUP items to be selected. ② Press the “UP/DOWN” button to select SETUP item. ③ Press the “ENTER” button to enter into the next menu. There are LCD ONTIME/BAUDRATE/IP INFO/REBOOT/RESET items to be selected. ④ Press the “UP/DOWN” button to select RESET item. ⑤ Press the “ENTER” button to confirm reset. It will prompt: RESET SUCCESS! Note: Pressing the “MENU” button will return to the previous menu. |
6 | POWER button | Long press the POWER button for 1 seconds to enter the standby mode, then short press it to wake up the device. |
7 | LOCK button | Short press the LOCK button to lock front panel buttons (Except the power button); Press it again to unlock. |
Rear Panel
| NO. | Name | Function Description |
| 1 | AUDIO OUT (1~8) | OPTICAL: Optical audio output port, connected to an audio output device such as audio amplifier. L/R AUDIO: Analog audio output port, supporting balanced/unbalancedaudiooutput,withamaximumsupportof2Vrms. Balancedconnectionmethod:L+,L-,,R+,R- Unbalancedconnectionmethod:L+,,R+ |
| 2 | TCP/IP | TCP/IP control port, connected to PC or router with an UTP cable to control the matrix through Web. |
| 3 | RS-232 port | Connect to a PC or control system by D-Sub 9-pin cable to transmit RS-232 command. |
| 4 | IR EXT | If the IR receiver window of the unit is blocked or the unit is installed in a closed area out of infrared line of sight, the IR receiver cable can be inserted to the “IR EXT” port to receive the IR remote signal. |
| 5 | HDMI INPUT ports (1~8) | HDMI input ports, connected to HDMI source device such as 8K computer, DVD or set-top box with an HDMI cable. |
| 6 | HDMI OUTPUT ports (1~8) | HDMI output ports, connected to HDMI display device such as TV or monitor with an HDMI cable. |
| 7 | DC 24V | Connect to 24V/3.75A power adapter. |
| 8 | GND | Connect the housing to the ground. |
Note:
You can restore the factory settings via the front panel, web or RS-232 command.
Power cut memory function is available except for standby status.
The RS-232 and Web will be available in a few minutes when the device is powered on.
![添加微信 添加微信 186-1286-5252](javascript:Site.hoverQrCode("//53583.s21i.faiusr.com/2/ABUIABACGAAgsc-DqQYo2ZX8EjCEBTiJBQ.jpg",this,{"tips":"请使用微信扫一扫"});){kind=link}